|
Seal leakage
Issue:
Common valves
|
|
Solution:
Ball Segment Valve |
|
|
|
| Most common valves have static seals that are mainly used for non-abrasive powders, liquids and gassesunder pressure. A static seal means that the seal is constantly in contact with product and the surface of the moving body while opening and closing. This shortens the lifespan of the seal greatly shich result in valve leakage. |
|
The AGP Segment ball valve with inflatable seal are used where an absolute pressure and vacuum tight valve is required. Because the seal is inflatable and not in contact with the Segment when opening and closing, therefore increasing the seals lifespan considerably. |
|
